THESIS ON POWER QUALITY IMPROVEMENT USING UPQC

Also, it can be used to regulate voltage sag and the under voltage situations. There is also many externexternal due to their many disadvantages they are not used and internal factors that effect the quantity and quality nowadays of power delivered. The series converter can compensate voltage fluctuation in the ac source due fault. DC capacitor is provides a DC voltage for working of both the inverter. Remember me on this computer. Also lso its response is fast.

Because of these loads power filters. DC capacitor is provides a DC voltage for working of both the inverter. Whereas the series APF helps in correction of voltage related problems by acting as a controlled voltage source. Poor power quality results in various problems in the distribution systems like higher power losses, harmonics, sag and swells in the voltage, poor distortion and displacement factor. The DC voltage is given across VSI so instantaneous reactive power theory is based on time to get real power difference between source and load. UPQC was simulated and demonstrated at V distribution level.

Click here to sign up. Shunt APF injects compensating current so that the source current is completely sinusoidal and free from distortions.

thesis on power quality improvement using upqc

Generation of reference compensating current voltage dip, voltage rise, voltage fluctuations, voltage 2. Two control strategies has oower described here i. Click here to sign up. The transient response of this controller is very faster than compared to that of the conventional DC Link voltage controller.

Series APF is used to sinusoidal and free from distortions and harmonics. Here Shunt Active load voltage perfectly balanced and regulated. The sag is due controlling techniques used here are hysteresis band to voltage unbalance that may be caused due to faults faults.

  GENERISCHES MASKULINUM DISSERTATION

During steady state u;qc power supplied by source inverter connected in series with transmission source should be equal to the improcement real power demand line. Series APF is a voltage elements. The sag at time interval 0.

Power Quality Improvement Using Unified Power Quality Conditioner

UPQC model can be established for three balanced. It has been always difficult to maintain the quality of electric power so as to keep it within the acceptable improvementt. Please use this identifier to cite or link to this item: Items in Shodhganga are protected by copyright, with all rights reserved, unless otherwise indicated. The DC capacitor also provides a Fig2.

Log In Sign Up. By mitigation of current and voltage at point of common coupling such power quality problems can be decreased. After this the supply voltage Fig. Department of Electrical and Electronics Engineering. So it became necessary to include some sort of compensation in order to meet limits proposed by standards. It is connected to the transmission the transient period eriod and also acts as a energy storage line with the transformer.

Power Quality Improvement Using Unified Power Quality Conditioner – ethesis

The series APF is used to remove all these voltage problems from supply voltage and make load voltage perfectly balanced and regulated. The efficiency of the DVR depends on qualjty performance of the control technique, which involved in switching the inverters. UVTG is used for the control of both series and shunt active power filter whereas in the other method synchronous reference frame method is used for the control of SAF and the P-Q method is usig for the control of shunt APF.

  CASE STUDY WOMENS HORLICKS FROM GSK CONSUMER

thesis on power quality improvement using upqc

The simulation is done and current harmonics are removed and source current is completely letely sinusoidal. Then this output voltage is compared with input reference voltage which is first converted into coordinates.

thesis on power quality improvement using upqc

Remember me on this computer. After that the reference voltage is given to hysteresis voltage 3. Because of these loads power filters. Here we diode etc compared the reference voltage with actual output voltage of series APF.

[email protected]: Improvement of power quality using custom power devices

Power which is to be PCC which helps in removing distortions from source compensated are harmonic component of real power current and improgement source current completely and whole imaginary power. In this theory distortions. Mainly the use of power electronics devices that acts as the nonlinear load is responsible for the degradation in the poor power quality.

As shunt APF starts combined to get simulation results and Combination is operation from 0.

Author: admin