STAR CCM+ THESIS

Process summary The work started with modeling the geometry of the cyclones and create a fine independent mesh. Note by Dheeraj Reddy Devarampally. Siemens Industrial Turbomachinery AB offer products and solutions for generating sustainable and resource efficient electricity. These were generated for all three cyclones. Our customers include utilities, independent power producers and companies in the oil and gas industry.

Our goal with this thesis was to document the performance of three cyclone separators with- and without outlet element, by measuring pressure drop and separation efficiency. Note by Dheeraj Reddy Devarampally. Graph of axial velocity for 6A. Extent 1 online resource vi, 32 p. Our customers include utilities, independent power producers and companies in the oil and gas industry.

Extent 1 online resource vi, 32 p.

star ccm+ thesis

The main focus in the thesis was to study this effect. All Text Images Audio Video. Created 3D-model of the cyclone. The outlet element can be used to connect several cyclones to a common outlet.

AG is a Norwegian engineering firm specializing in water- air- drying- and purification techniques. Simple citation Devarampally, Dheeraj Reddy.

GROUP 11 – BACHELOR THESIS

These observations can be used as a guideline for further development of cyclone separators. Afterwards, the separation efficiency was calculated.

The framework relies on coupled CFD—DEM simulations to staf particle-level mechanistic information such as collision frequencies, particle flux and residence time of the particles in the spray zone. This documentation would help Alfsen and Gunderson to expand their portfolio. Section plane, which shows the static pressure in the cyclone.

  BHAM THESIS REPOSITORY

This mechanistic data can be used in Population balance models PBM to model the rate processes such as agglomeration, breakage and consolidation. If time frame allows a higher fidelity model considering the hub and shroud cavities could be investigated. Whole Engine department We are 14 persons who are responsible for rotor and blade dynamics as well as secondary air systems in our gas turbines Power output: Statistical Profile Version 8.

Development of two-way coupled CFD – DEM model for top spray fluid bed granulator using star CCM+

Simulated streamlines for airflow in the cyclone. Either Can’t find what you are looking for?

star ccm+ thesis

Rights The author owns the copyright to this work. Graph of tangential velocity for 5A. About the project This project was a collobration between the task master Alfsen and Hhesis AS and our group, consisting of four mechanical engineer students at Oslo and Akershus University College of Applied Science.

Through numberious simulations, the overall performance of the separtion with outlet element were obtained and reported. This model accurately predicts the effect of process parameters inlet air flow rate, temperature on the particle dynamics and the particle residence time inside the spray zone.

This generated various results, which we analyzed and discussed.

  CURRICULUM VITAE MET ZONDER HOOFDLETTERS

Master thesis: Forced response validation of STAR CCM+ with full turbine simulation

Finspang, Sweden Job Family: This project was a collobration between the task master Alfsen and Gunderson AS and our group, consisting of four mechanical engineer students at Oslo and Akershus University College of Applied Science.

Graph of axial velocity for 6A.

These were generated for all three cyclones. Separation efficiency Pressure drop. Sstar then continued to with injecting particles to the cyclone. The bachelor thesis was conducted and written by four students at HiOA over the course of the spring semester:.

It is desired to have the highest possible separation efficiency and the lowest possible pressure drop, though these two often go hand in hand. Note by Dheeraj Reddy Devarampally.

Numerical investigation of cyclone separators with- and without outlet element

Graph of static pressure for 4A. Process summary The work started with modeling the geometry of the cyclones and create a fine independent mesh. You’ll joinof the smartest minds all tesis together to build a better future. Our customers include utilities, independent power producers and companies in the oil and gas industry.

Author: admin